Non-isolated patient connection (Type B applied
part).
Isolated patient connection for applied part intended
for intraoperative use, including direct cardiac
application and contact with major vessels (Type CF
applied part).
Defibrillation-proof patient connection (Type CF
applied part).
Identifies ESD (electrostatic-discharge) sensitivity of
a connector that is not tested as specified in
IEC 60601-1-2. Do not touch exposed connector
pins. Touching exposed pins can cause electrostatic
discharge, which can damage the product.
Identifies an On/Off control.
On a two-position power switch, represents On and
Off.
Identifies a safety note.
Indicates that the user should see the instructions
for use for safety information.
iU22 User Manual
36
4535 614 45861
Safety
2
To Next Page
Loading...