Philips MP2 User Manual

6 ECG, Arrhythmia, ST and QT Monitoring
150
Working in the ST Map Task Window
You may need to activate the ST map task window to see all the data, and to access the pop-up keys.
Select the map view on screen to activate its task window. Once you activate it, you can perform the
tasks detailed here.
Switching Between ST Map Views
To switch between views,
•Select
Current View or Trend View to toggle between views.
If your trend view is empty, you need to adjust the priority of this measurement in the trending priority
list. See “Trend Priority” on page 226.
Displaying an ST Reference Baseline
You can display an ST reference baseline for the current view, or for the trended view. The baseline is
shown in yellow. However, if the ECG color is yellow, the baseline is shown in green. Use this baseline
to detect ST changes. The baseline is derived automatically whenever the monitor relearns arrhythmia
and also on user request.
Select
Show Baseline/Hide Baseline to toggle between baseline display on and off.
Updating an ST Map Reference Baseline
To update the baseline,
•In the
Setup ST Analysis menu, select ST View then select Update Baseline.
Changing the Scale of the ST Map
To change scale,
•Select
Size Up or Size Down to alter the size at which monitor displays the map.
Changing the Trending Interval
To determine how frequently the monitor displays a trended sample,
1 In Trend view, select Select Interval.
2 Select the required interval from the menu. The interval ranges between 12 seconds to 30 minutes.
Printing an ST Map Report
To print the most recently viewed (current or trend) window,
1 Select Main Setup then select Reports.
2 Select ST Map.
3 Press Print.
Viewing STE Maps
The STE Map displays STE values, ST values measured at the J point, together with the STE Limits as
configured in the
Setup ST Elevation menu for the gender of the current patient. Just like ST Map, it
displays two planes obtained from a multi-lead ECG in a multi-axis diagram, where each axis
represents a lead. The position of the axes within the diagram correspond to the placement of the

Philips MP2 Specifications

General

Brand	Philips
Model	MP2
Category	Medical Equipment
Language	English