21 Using Batteries
252
Symbols indicating critical situations are colored red.
Printing Battery Reports
To print the information in the Battery Status window on a connected printer,
1 Select the battery status information on the Screen to open the Battery Status window
2 Select the Print Status pop-up key.
Checking Battery Charge
To check the charge status of a battery, refer to the battery power gauge on the screen, or open the
Battery Status window.
When Battery Lifetime is Expired
When the battery is aged, either after 3 years from manufacturing date or after 500 full charge/
discharge cycles, it is recommended to replace the battery. To remind you of this, a message will appear
in the
Battery Status window. This message will only be displayed at the appropriate time when the date
and time on the monitor is correct.
WARNING
The risk of battery failure increases with age, when a battery remains in use longer than 3 years or 500
full charge-discharge cycles. Such failures can result in overheating that in rare cases can cause the
battery to ignite or explode.
Battery status symbols Battery malfunction symbols
battery is empty (red) incompatible battery
battery not charging as the temperature is
above or below the specified range
(red) battery malfunction
battery requires maintenance (red) battery has no power left
charging stopped to protect the battery (red) battery temperature too high
To Next Page
Loading...
Need help?
General
