Philips MP2 User Manual

5 Managing Patients and Equipment
103
Information Center Compatibility
The functionality available for managing patients and equipment depends on the IntelliVue
Information Center being used. In the following table the main differences between the PIIC and
PIIC iX are shown.
PIIC PIIC iX
Not available
Find Patient - searching for a patient in the Information
Center or other connected hospital systems. (With
LAN and WLAN connection only)
Transfer Patient - patient is moved to transfer
list.
Transfer Patient - can transfer patient directly to
another bed/unit and from another bed/unit. (With
LAN and WLAN connection only)
Not available A unique patient list provides information about the
current status of a patient allowing intelligent prompts
and preventing the same patient being admitted twice.
Add Equipment - allows only assignment of
telemetry devices via manual pairing.
Add Equipment - allows assignment of other monitors,
telemetry devices and X2 MMS. (With LAN and
WLAN connection only)
Remove equipment - allows only removal of
telemetry devices via
Unpair To Mon. and
Unpair To Tele.
Remove equipment - allows removal of other monitors,
telemetry devices and X2 MMS.
Not available
Select Location - allows a temporary location to be
shown when a patient is not in the unit. (With LAN
and WLAN connection only)
Not available
Select Caregiver - allows a Caregiver to be assigned to a
patient
Not available Paced status Unconfirmed is the initial setting before a
paced status has been entered.
Unconfirmed will switch
pace pulse rejection on but makes the user aware that
no paced status has been selected.

Philips MP2 Specifications

General

Brand	Philips
Model	MP2
Category	Medical Equipment
Language	English