24 Specifications
288
WARNING
Not adhering to these instructions when repositioning the monitor can cause damage to the monitor.
In extreme cases, when force is applied to the monitor, it can result in the monitor falling from the
mounting arm.
If, at any time, the monitor appears to be loose or insecurely mounted, contact your service personnel.
Altitude Setting
Altitude affects CO
2
measurements. The monitor must be configured at installation to the correct
altitude.
Monitor Safety Specifications
The monitor and MMS Extensions comply with the Medical Device Directive 93/42/EEC.
In addition, the product complies with:
IEC 60601-1:1988 + A1:1991 + A2:1995
EN60601-1:1990 + A1:1993 + A2:1995
UL 60601-1:2003
CAN/CSA C22.2#601.1-M90 +Suppl. No. 1-94 + Am. 2
IEC 60601-1-1:2000
EN 60601-1-1:2001
IEC 60601-1-2:2001 + A1:2004
EN 60601-1-2:2001 + A1:2006.
The possibility of hazards arising from software errors was minimized in compliance with:
ISO 14971:2007
EN60601-1-4:1996 + A1:1999
IEC 60601-1-4:1996 + A1:1999.
Classification (according to IEC 60601-1): Class II, Type CF, Continuous Operation.
EMC and Radio Regulatory Compliance
This ISM device complies with Canadian ICES-001. Cet appareil ISM est conforme à la norme NMB-
001 du Canada.
The MP2 including IntelliVue Instrument Telemetry WMTS (US only))
The MP2 including IntelliVue Instrument Telemetry WMTS complies with part 15 of the FCC Rules.
Operation is subject to the condition that this device does not cause harmful interference. Operation
of this equipment requires the prior coordination with a frequency coordinator designated by the FCC
for the Wireless Medical Telemetry Service.
To Next Page
Loading...