Philips MP2 - Enabling Automatic Mode and Setting Repetition Time

11 Monitoring NBP
188
CAUTION
Use clinical judgment to decide whether to perform repeated series of STAT measurements because of
the risk of purpura, ischemia and neuropathy in the limb with the cuff.
Enabling Automatic Mode and Setting Repetition
Time
1 In the Setup NBP menu, select Mode and select Auto from the pop-up menu.
2 For an automatic measurement, select Repeat and set the time interval between two measurements.
Stop Manual measurements
Start/Stop
Start/ Stop
Stop NBP
Stop current Auto measurement
Start/Stop
Start/ Stop
Stop NBP
Stop current STAT measurement and end series
Start/Stop
Start/ Stop
NBP STAT
NBP STAT
Stop NBP
Stop Auto, Manual or STAT measurement AND
series
Stop All
Stop All
Action to be performed NBP Setup menu SmartKeys