2What's New?
46
Invasive Pressure Changes
Wave cursor - A cursor is now available on the realtime pressure wave to allow you to define a
position and store the corresponding value.
Reduced alarm limit steps in lower ranges - The alarm limits setting in 2 mmHg steps is now
possible in ranges up to 50 mmHg (previously up to 30 mmHg).
New Patient Check
The monitor can be configured to ask you in certain situations: after a specified power-off period, after
a specified standby period and when no basic vitals (HR, RR, Pulse, SpO
2
, NBP) have been measured
for a specified period, whether a new patient is now being monitored. By selecting the
Yes pop-up key
you can discharge the previous patient and reset settings.
New Smart Keys
A SmartKey is available for
New Lead Setup when a new ECG lead set with fewer leads than previously
is being used.
Better Visibility Of Gridlines
The brightness of the gridlines on the realtime waves has been increased for better visibility.
To Next Page
Loading...