R&S FSV3000 Series - Page 1136

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1136User Manual 1178.8520.02 ─ 01
• parameter 1 (see the Service Manual)
• parameter 2 (see the Service Manual)
Manual operation: See " Service Function " on page 630
See " Send " on page 630
DIAGnostic:SERVice:SFUNction:LASTresult?
This command queries the results of the most recent service function you have used.
Return values:
<Result>
Usage: Query only
DIAGnostic:SERVice:SFUNction:RESults:DELete
This command deletes the results of the most recent service function you have used.
Manual operation:
See " Clear Results " on page 631
DIAGnostic:SERVice:SFUNction:RESults:SAVE [<FileName>]
This command saves the results of the most recent service function you have used.
Parameters:
<FileName> String containing the file name.
Manual operation: See " Save Results " on page 631
DIAGnostic:SERVice:SINFo?
This command creates a *.zip file with important support information. The *.zip file con-
tains the system configuration information ("device footprint"), the current eeprom data
and a screenshot of the screen display (if available).
As a result of this command, the created file name (including the drive and path) is
returned.
If you contact the Rohde&Schwarz support to get help for a certain problem, send this
file to the support in order to identify and solve the problem faster.
Return values:
<FileName> String containing the drive, path and file name of the created
support file, where the file name consists of the following ele-
ments:
<R&S Device ID>: The unique R&S device ID indicated in the
"Versions + Options" information
<CurrentDate>: The date on which the file is created
(<YYYYMMDD>)
<CurrentTime>: The time at which the file is created
(<HHMMSS>)
Configuring the R&S FSV/A