R&S FSV3000 Series - Controlling the Enable Part; Reading out the Event Part

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1154User Manual 1178.8520.02 ─ 01
Query parameters:
<ChannelName> String containing the name of the channel.
The parameter is optional. If you omit it, the command works for
the currently active channel.
Usage: Query only
14.11.3 Reading Out the EVENt Part
For more information on the event part see Chapter 13.1.7.2, "Structure of a SCPI Sta-
tus Register", on page 667.
STATus:OPERation[:EVENt]?
STATus:QUEStionable[:EVENt]?
STATus:QUEStionable:ACPLimit[:EVENt]? <ChannelName>
STATus:QUEStionable:EXTended[:EVENt]? <ChannelName>
STATus:QUEStionable:EXTended:INFO[:EVENt]? <ChannelName>
STATus:QUEStionable:FREQuency[:EVENt]? <ChannelName>
STATus:QUEStionable:LIMit<n>[:EVENt]? <ChannelName>
STATus:QUEStionable:LMARgin<n>[:EVENt]? <ChannelName>
STATus:QUEStionable:POWer[:EVENt]? <ChannelName>
STATus:QUEStionable:TEMPerature[:EVENt]? <ChannelName>
STATus:QUEStionable:TIME[:EVENt]? <ChannelName>
These commands read out the EVENt section of the status register.
At the same time, the commands delete the contents of the EVENt section.
Suffix:
<n>
.
Window
Query parameters:
<ChannelName> String containing the name of the channel.
The parameter is optional. If you omit it, the command works for
the currently active channel.
Usage: Query only
14.11.4 Controlling the ENABle Part
For more information on the enable part see Chapter 13.1.7.2, "Structure of a SCPI
Status Register", on page 667.
STATus:OPERation:ENABle <SumBit>
STATus:QUEStionable:ENABle <SumBit>
STATus:QUEStionable:ACPLimit:ENABle <SumBit>,<ChannelName>
STATus:QUEStionable:EXTended:ENABle <SumBit>,<ChannelName>
STATus:QUEStionable:EXTended:INFO:ENABle <SumBit>,<ChannelName>
STATus:QUEStionable:FREQuency:ENABle <SumBit>,<ChannelName>
STATus:QUEStionable:LIMit<n>:ENABle <SumBit>,<ChannelName>
STATus:QUEStionable:LMARgin<n>:ENABle <SumBit>,<ChannelName>
Using the Status Register