Applications, Measurement Channels
R&S
®
FSVA3000/ R&S
®
FSV3000
110User Manual 1178.8520.02 ─ 01
Spectrum
In the Spectrum application the provided functions correspond to those of a conven-
tional spectrum analyzer. The analyzer measures the frequency spectrum of the RF
input signal over the selected frequency range with the selected resolution and sweep
time, or, for a fixed frequency, displays the waveform of the video signal. This applica-
tion is used in the initial configuration.
For details see Chapter 7, "Measurements and Results", on page 120.
Remote command:
INST:SEL SAN, see INSTrument[:SELect] on page 739
3G FDD BTS
The 3G FDD BTS application requires an instrument equipped with the 3GPP Base
Station Measurements option, R&S FSV3-K72. This application provides test measure-
ments for W-CDMA downlink signals (base station signals) according to the test speci-
fication.
For details see the R&S FSV3-K72/-K73 User Manual.
Remote command:
INST:SEL BWCD, see INSTrument[:SELect] on page 739
3G FDD UE
The 3G FDD UE application requires an instrument equipped with the 3GPP User
Equipment Measurements option, R&S FSV3-K73. This application provides test mea-
surements for W-CDMA uplink signals (mobile signals) according to the test specifica-
tion.
For details see the R&S FSV3-K72/-K73 User Manual.
Remote command:
INST:SEL MWCD, see INSTrument[:SELect] on page 739
5G NR
The 5G NR application requires an instrument equipped with one of the 5G NR Mea-
surements options.
The R&S FSV3-K144 application provides 5G NR measurements on the downlink.
The R&S FSV3-K145 application provides 5G NR measurements on the uplink.
For details see the R&S FSV3-K144 and R&S FSV3-K145 user manuals.
Remote command:
INST:SEL NR5G, see INSTrument[:SELect] on page 739
Amplifier
The Amplifier Measurement application requires an instrument equipped with the
Amplifier Measurement option R&S FSV3-K18. This application provides measure-
ments to measure the efficiency of traditional amplifiers and amplifiers that support
envelope tracking with the R&S FSV/A.
Also available is option R&S FSV3-K18D, which provides direct DPD functionality.
For details see the R&S FSV3-K18 User Manual (also contains information about
R&S FSV3-K18D.
Available Applications
To Next Page
Loading...
