R&S FSV3000 Series - Time Domain Power Configuration

Measurements and Results
R&S
®
FSVA3000/ R&S
®
FSV3000
281User Manual 1178.8520.02 ─ 01
between signal and noise power of a TDMA signal for instance can be measured by
using a measurement as a reference value and then varying the measurement range.
In order to get stable measurement results for a limited evaluation range, usually a trig-
ger is required.
7.9.4 Time Domain Power Configuration
Access: "Overview" > "Select Measurement" > "Time Domain Power" > "Time Dom
Power Config"
Time Domain Power Measurement