R&S FSV3000 Series - List Evaluation StateShow Peaks; List Evaluation State; Margin; Show Peaks

Measurements and Results
R&S
®
FSVA3000/ R&S
®
FSV3000
260User Manual 1178.8520.02 ─ 01
Configure the contents and display of the result list.
List Evaluation State .................................................................................................. 260
Show Peaks ............................................................................................................... 260
Margin ........................................................................................................................ 260
Details ........................................................................................................................ 261
Peaks per Range ....................................................................................................... 261
Save Evaluation List ...................................................................................................261
List Evaluation State
Activates or deactivates the list evaluation.
Remote command:
CALCulate<n>:ESPectrum:PEAKsearch:AUTO on page 821
TRACe<n>[:DATA] on page 975
Show Peaks
If activated, all peaks that have been detected during an active list evaluation are
marked with blue squares in the diagram.
Remote command:
CALCulate<n>:ESPectrum:PEAKsearch:PSHow on page 822
Margin
A margin functionality is not available for the limit check. However, you can define a
margin (=threshold) for the peak values to be displayed in the evaluation list. Only
peaks that exceed the margin value are displayed (also in the diagram, if activated).
Spurious Emissions Measurement