R&S FSV3000 Series - Selecting the Items to Store

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1066User Manual 1178.8520.02 ─ 01
MMEMory:RDIRectory <Directory>
This command deletes the indicated directory.
Setting parameters:
<Directory> String containing the path of the directory to delete.
Note that the directory you want to remove must be empty.
Usage: Setting only
14.9.2 Selecting the Items to Store
The following commands select the items to be included in the configuration file.
Depending on the used command, either the items from the entire instrument
(MMEMory:SELect[:ITEM]...), or only those from the currently selected channel
(MMEM:SELect:CHANnel[:ITEM]...) are stored.
MMEMory:SELect:CHANnel[:ITEM]:ALL.........................................................................1066
MMEMory:SELect[:ITEM]:ALL.......................................................................................1066
MMEMory:SELect:CHANnel[:ITEM]:DEFault...................................................................1067
MMEMory:SELect[:ITEM]:DEFault................................................................................. 1067
MMEMory:SELect:CHANnel[:ITEM]:HWSettings............................................................. 1067
MMEMory:SELect[:ITEM]:HWSettings............................................................................1067
MMEMory:SELect:CHANnel[:ITEM]:LINes:ALL............................................................... 1067
MMEMory:SELect[:ITEM]:LINes:ALL..............................................................................1067
MMEMory:SELect:CHANnel[:ITEM]:NONE..................................................................... 1068
MMEMory:SELect[:ITEM]:NONE................................................................................... 1068
MMEMory:SELect:CHANnel[:ITEM]:SPECtrogram.......................................................... 1068
MMEMory:SELect:CHANnel[:ITEM]:SGRam...................................................................1068
MMEMory:SELect[:ITEM]:SPECtrogram.........................................................................1068
MMEMory:SELect[:ITEM]:SGRam................................................................................. 1068
MMEMory:SELect:CHANnel[:ITEM]:TRACe[:ACTive].......................................................1068
MMEMory:SELect[:ITEM]:TRACe<t>[:ACTive]................................................................ 1068
MMEMory:SELect:CHANnel[:ITEM]:TRANsducer:ALL..................................................... 1069
MMEMory:SELect[:ITEM]:TRANsducer:ALL....................................................................1069
MMEMory:SELect:CHANnel[:ITEM]:ALL
MMEMory:SELect[:ITEM]:ALL
This command includes all items when storing or loading a configuration file.
The items are:
●
Limit lines: MMEMory:SELect[:ITEM]:LINes:ALL on page 1067
●
Spectrogram data: MMEMory:SELect[:ITEM]:SGRam on page 1068
●
Trace data: MMEMory:SELect[:ITEM]:TRACe<t>[:ACTive] on page 1068
Example:
MMEM:SEL:ALL
Usage: Event
Manual operation: See " Items: " on page 537
Managing Settings and Results