R&S FSV3000 Series - System Messages

General Instrument Setup
R&S
®
FSVA3000/ R&S
®
FSV3000
619User Manual 1178.8520.02 ─ 01
For details on options refer to the "Getting Started" manual, "Checking the Supplied
Items".
Remote commands:
SYSTem:FORMat:IDENt on page 1133
DIAGnostic:SERVice:BIOSinfo? on page 1129
DIAGnostic:SERVice:VERSinfo? on page 1130
Open Source Acknowledgment: Open
Displays a PDF file containing information on open source code used by the
R&S FSV/A firmware.
IVI Shared Components EULA: Open
Displays a PDF file containing copyright information on the IVI shared components
used by the R&S FSV/A firmware.
Install Option
Opens an edit dialog box to enter the license key for the option that you want to install.
Only user accounts with administrator rights are able to install options.
Install Option by XML
Opens a file selection dialog box to install an additional option to the R&S FSV/A using
an XML file. Enter or browse for the name of an XML file that contains the option key
and select "Select" .
Only user accounts with administrator rights are able to install options.
12.8.3 System Messages
Access: [Setup] > "System Configuration" > "System Messages"
The system messages generated by the R&S FSV/A are displayed.
The messages are displayed in the order of their occurrence; the most recent mes-
sages are placed at the top of the list. Messages that have occurred since you last vis-
ited the system messages tab are marked with an asterisk '*'.
System Configuration Settings