R&S FSV3000 Series - List Evaluation (Results Configuration)

Measurements and Results
R&S
®
FSVA3000/ R&S
®
FSV3000
236User Manual 1178.8520.02 ─ 01
Note: Restoring predefined standard files. The standards predefined by Rohde &
Schwarz available at the time of delivery can be restored using the "Restore Standard
Files" function (see " Restore Standard Files " on page 236).
Restore Standard Files
Restores the standards predefined by Rohde & Schwarz available at the time of deliv-
ery.
The XML files from the
C:\Program Files\Rohde-Schwarz\FSV3000\<version>\sem_backup folder
are copied to the
C:\Program Files\Rohde-Schwarz\FSV3000\<version>\sem_std folder.
Note that this function will overwrite customized standards that have the same name
as predefined standards.
Remote command:
[SENSe:]ESPectrum<sb>:PRESet:RESTore on page 792
7.6.5.7 List Evaluation (Results Configuration)
Access: "Overview" > "Select Measurement" > "Spectrum Emission Mask" > "List
Evaluation"
In the "List Evaluation" dialog box, you configure the contents and display of the SEM
results.
Spectrum Emission Mask (SEM) Measurement