R&S FSV3000 Series - Analog Demodulation; Gsm; IQ Analyzer; Lte

Applications, Measurement Channels
R&S
®
FSVA3000/ R&S
®
FSV3000
111User Manual 1178.8520.02 ─ 01
Remote command:
INST:SEL AMPL, see INSTrument[:SELect] on page 739
Analog Demodulation
The Analog Demodulation application requires an instrument equipped with the corre-
sponding optional software. This application provides measurement functions for
demodulating AM, FM, or PM signals.
For details see the R&S FSV3-K7 User Manual.
Remote command:
INST:SEL ADEM, see INSTrument[:SELect] on page 739
GSM
The GSM application requires an instrument equipped with the GSM Measurements
option R&S FSV3-K10. This application provides GSM measurements.
For details see the R&S FSV3-K10 User Manual.
Remote command:
INST:SEL GSM, see INSTrument[:SELect] on page 739
I/Q Analyzer
The I/Q Analyzer application provides measurement and display functions for I/Q data.
For details see the R&S FSV3 I/Q Analyzer User Manual.
Remote command:
INST:SEL IQ, see INSTrument[:SELect] on page 739
LTE
The LTE application requires an instrument equipped with one of the LTE Measure-
ments options R&S FSV3-K10x. These applications provide LTE measurements.
For details see the R&S FSV3-K10x User Manuals (one for downlink, one for uplink).
Remote command:
INST:SEL LTE, see INSTrument[:SELect] on page 739
NB-IoT
The NB-IoT application requires an instrument equipped with the NB-IoT measure-
ments option R&S FSV3-K106. This application provides NB-IoT measurements in the
downlink.
For details see the R&S FSV3-K106 (NB-IoT Downlink) User Manual.
Remote command:
INST:SEL NIOT, see INSTrument[:SELect] on page 739
Noise Figure
The Noise Figure application requires an instrument equipped with the Noise Figure
Measurements option R&S FSV3-K30. This application provides noise figure measure-
ments.
For details see the R&S FSV3-K30 User Manual.
Remote command:
INST:SEL NOISE, see INSTrument[:SELect] on page 739
Available Applications