R&S FSV3000 Series - Storing and Loading Instrument Settings

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1069User Manual 1178.8520.02 ─ 01
MMEMory:SELect:CHANnel[:ITEM]:TRANsducer:ALL <State>
MMEMory:SELect[:ITEM]:TRANsducer:ALL <State>
This command includes or excludes transducer factors when storing or loading a con-
figuration file.
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Example:
MMEM:SEL:TRAN:ALL ON
Manual operation: See " Items: " on page 537
See " Save " on page 599
14.9.3 Storing and Loading Instrument Settings
See also:
●
INSTrument[:SELect] on page 739 to select the channel.
MMEMory:CLEar:ALL...................................................................................................1069
MMEMory:CLEar:STATe............................................................................................... 1069
MMEMory:LOAD:AUTO................................................................................................1070
MMEMory:LOAD:STATe................................................................................................1070
MMEMory:LOAD:TYPE................................................................................................ 1071
MMEMory:STORe<n>:STATe........................................................................................ 1072
MMEMory:STORe<n>:STATe:NEXT...............................................................................1072
MMEMory:STORe<n>:TYPE.........................................................................................1073
SYSTem:PRESet......................................................................................................... 1073
SYSTem:PRESet:CHANnel[:EXEC]............................................................................... 1074
MMEMory:CLEar:ALL
This command deletes all instrument configuration files in the current directory.
You can select the directory with MMEMory:CDIRectory on page 1062.
Example:
MMEM:CLE:ALL
Usage: Event
MMEMory:CLEar:STATe <1>, <FileName>
This command deletes an instrument configuration file.
Setting parameters:
<1>
<FileName> String containing the path and name of the file to delete.
The string may or may not contain the file's extension.
Example:
MMEM:CLE:STAT 1,'TEST'
Usage: Setting only
Managing Settings and Results