R&S FSV3000 Series - Creating Screenshots of Current Measurement Results and Settings; Print and Screenshot Settings

Data Management
R&S
®
FSVA3000/ R&S
®
FSV3000
545User Manual 1178.8520.02 ─ 01
11.5 Creating Screenshots of Current Measurement
Results and Settings
To document the graphical results and the most important settings for the currently per-
formed measurement, you can create a screenshot of the current display. Screenshots
can either be printed or stored to a file.
● Print and Screenshot Settings...............................................................................545
● How to Store or Print Screenshots of the Display.................................................555
● Example for Storing Multiple Measurement Results to a PDF File....................... 558
11.5.1 Print and Screenshot Settings
Access: "Print" icon in the toolbar
For step-by-step instructions, see Chapter 11.5.2, "How to Store or Print Screenshots
of the Display", on page 555.
Remote commands for these settings are described in Chapter 14.9.4, "Storing or
Printing Screenshots", on page 1074.
To print a screenshot of the current display with the current settings immediately, with-
out switching to the "Print" menu, use the "Print immediately" icon in the toolbar.
● Print Content Settings........................................................................................... 545
● Print Preview Functions........................................................................................ 548
● Printer Settings......................................................................................................550
● Page Setup........................................................................................................... 553
● Print Color Settings............................................................................................... 554
11.5.1.1 Print Content Settings
Access: "Print" > "Print Config" > "Content" tab
The content settings determine which data is included in the printout.
Note that some content settings are independent of the selected printing device, others
are printing device-specific.
Creating Screenshots of Current Measurement Results and Settings