R&S FSV3000 Series User Manual

Applications, Measurement Channels
R&S
®
FSVA3000/ R&S
®
FSV3000
112User Manual 1178.8520.02 ─ 01
Phase Noise
The Phase Noise application requires an instrument equipped with the Phase Noise
Measurements option, R&S FSV3-K40. This application provides measurements for
phase noise tests.
For details see the R&S FSV3-K40 User Manual.
Remote command:
INST:SEL PNOISE, see INSTrument[:SELect] on page 739
Pulse Measurements
The Pulse application requires an instrument equipped with the Pulse Measurements
option, R&S FSV3-K6. This application provides measurement functions for pulsed sig-
nals.
For details see the R&S FSV3-K6 User Manual.
Remote command:
INST:SEL PULSE, see INSTrument[:SELect] on page 739
Vector Signal Analysis (VSA)
The VSA application requires an instrument equipped with the Vector Signal Analysis
option, R&S FSV3-K70. This application provides measurements and evaluations for
single-carrier digitally modulated signals.
For details see the R&S FSV3-K70 User Manual.
Remote command:
INST:SEL DDEM, see INSTrument[:SELect] on page 739
WLAN
The WLAN application requires an instrument equipped with the WLAN option,
R&S FSV3-K91/91n. This application provides measurements and evaluations accord-
ing to the WLAN IEEE 802.11 standards.
For details see the R&S FSV3-K91 User Manual.
Remote command:
INST:SEL WLAN, see INSTrument[:SELect] on page 739
6.2 R&S MultiView
Each application is displayed in a separate tab. An additional tab ("MultiView") provides
an overview of all currently active channels at a glance. In the "MultiView" tab, each
individual window contains its own channel bar with an additional button. Select this
button to switch to the corresponding channel display quickly.
R&S MultiView

R&S FSV3000 Series Specifications

General

TOI (Third-Order Intercept)	> +15 dBm
Resolution Bandwidth	1 Hz to 1 MHz
Display	12.1-inch touchscreen
Analysis Bandwidth	40 MHz
Video Bandwidth (VBW)	1 Hz to 1 MHz
Amplitude accuracy	±0.5 dB
Interface	USB
Dynamic Range	> 100 dB