R&S FSV3000 Series - Service Functions

General Instrument Setup
R&S
®
FSVA3000/ R&S
®
FSV3000
625User Manual 1178.8520.02 ─ 01
Exception: The SCPI Recorder maintains control of the generator even if you switch
applications.
Select "Test Connection" on page 625 to establish a temporary connection from the
R&S FSV/A to the specified signal generator.
If a connection to a signal generator is already configured, the connection data is provi-
ded for information only.
Remote command:
CONFigure:GENerator:IPConnection:ADDRess on page 1135
Test Connection
The R&S FSV/A attempts to establish a connection to the signal generator.
If an instrument is connected, the following information is displayed:
●
Device type
●
Name and serial number
●
Connection state
Remote command:
CONFigure:GENerator:CONNection:CSTate? on page 1134
CONFigure:GENerator:CONNection[:STATe] on page 1134
Connect/Disconnect
The R&S FSV/A attempts to establish a connection to the signal generator, or discon-
nects it.
If an instrument is connected, the following information is displayed:
●
Device type
●
Name and serial number
●
Connection state
Note: While the SCPI Recorder is enabled with generator control, you cannot discon-
nect the generator.
Remote command:
CONFigure:GENerator:CONNection[:STATe] on page 1134
CONFigure:GENerator:CONNection:CSTate? on page 1134
12.9 Service Functions
Access: [Setup] > "Service"
When unexpected problems arise with the R&S FSV/A some service functions may
help you solve them.
For more helpful information for support, see also Chapter 16.5, "Collecting Information
for Support", on page 1218
● R&S Support Information...................................................................................... 626
● Self-test Settings and Results...............................................................................627
● Calibration Signal Display..................................................................................... 628
● Service Functions..................................................................................................629
● Hardware Diagnostics...........................................................................................631
Service Functions