R&S FSV3000 Series - General Data Storage and Loading Commands

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1060User Manual 1178.8520.02 ─ 01
14.9.1 General Data Storage and Loading Commands
The following commands are available for all applications.
See also:
●
FORMat[:DATA] on page 975
FORMat:DEXPort:DSEParator...................................................................................... 1060
MMEMory:CATalog.......................................................................................................1061
MMEMory:CATalog:LONG.............................................................................................1061
MMEMory:CDIRectory..................................................................................................1062
MMEMory:COMMent....................................................................................................1062
MMEMory:COPY......................................................................................................... 1062
MMEMory:DATA.......................................................................................................... 1062
MMEMory:DELete[:IMMediate]......................................................................................1063
MMEMory:MDIRectory................................................................................................. 1063
MMEMory:MOVE.........................................................................................................1063
MMEMory:MSIS...........................................................................................................1064
MMEMory:NAME......................................................................................................... 1064
MMEMory:NETWork:DISConnect.................................................................................. 1064
MMEMory:NETWork:MAP.............................................................................................1065
MMEMory:NETWork:UNUSeddrives?............................................................................ 1065
MMEMory:NETWork:USEDdrives..................................................................................1065
MMEMory:RDIRectory..................................................................................................1066
FORMat:DEXPort:DSEParator <Separator>
This command selects the decimal separator for data exported in ASCII format.
Parameters:
<Separator> POINt | COMMa
COMMa
Uses a comma as decimal separator, e.g. 4,05.
POINt
Uses a point as decimal separator, e.g. 4.05.
*RST: *RST has no effect on the decimal separator.
Default is POINt.
Example:
FORM:DEXP:DSEP POIN
Sets the decimal point as separator.
Manual operation: See " Saving the Result Summary (Evaluation List) to a File "
on page 237
See " Save Evaluation List " on page 261
See " Export Peak List " on page 463
See " Decimal Separator " on page 521
Managing Settings and Results