Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
821User Manual 1178.8520.02 ─ 01
14.5.6.8 Configuring the List Evaluation
The following commands configure the list evaluation.
Useful commands for SEM measurements described elsewhere
●
MMEMory:STORe<n>:LIST on page 1085
Remote commands exclusive to SEM measurements
CALCulate<n>:ESPectrum:PSEarch:AUTO...................................................................... 821
CALCulate<n>:ESPectrum:PEAKsearch:AUTO.................................................................821
CALCulate<n>:ESPectrum:PSEarch[:IMMediate].............................................................. 821
CALCulate<n>:ESPectrum:PEAKsearch[:IMMediate].........................................................821
CALCulate<n>:ESPectrum:PSEarch:MARGin...................................................................821
CALCulate<n>:ESPectrum:PEAKsearch:MARGin............................................................. 821
CALCulate<n>:ESPectrum:PSEarch:PSHow.................................................................... 822
CALCulate<n>:ESPectrum:PEAKsearch:PSHow...............................................................822
CALCulate<n>:ESPectrum:PSEarch:AUTO <State>
CALCulate<n>:ESPectrum:PEAKsearch:AUTO <State>
This command turns the list evaluation on and off.
Suffix:
<n>
.
Window
Parameters:
<State> ON | OFF | 0 | 1
*RST: 1
Example:
CALC:ESP:PSE:AUTO OFF
Deactivates the list evaluation.
Manual operation: See " List Evaluation State (Result Summary)" on page 237
See " List Evaluation State " on page 260
CALCulate<n>:ESPectrum:PSEarch[:IMMediate]
CALCulate<n>:ESPectrum:PEAKsearch[:IMMediate]
This command initiates a list evaluation.
Suffix:
<n>
.
Window
CALCulate<n>:ESPectrum:PSEarch:MARGin <Threshold>
CALCulate<n>:ESPectrum:PEAKsearch:MARGin <Margin>
This command defines the threshold of the list evaluation.
Suffix:
<n>
.
Window
Configuring and Performing Measurements