R&S FSV3000 Series - Page 538

Data Management
R&S
®
FSVA3000/ R&S
®
FSV3000
538User Manual 1178.8520.02 ─ 01
Remote command:
MMEMory:STORe<n>:STATe on page 1072
MMEMory:STORe<n>:STATe:NEXT on page 1072
Recall in New Channel / Recall in Current Channel
Restores the instrument settings as saved in the selected settings file. If the settings
file contains settings for a specific "Channel" only, select "Recall in New Channel" to
activate a new channel with the stored settings. Select "Recall in Current Channel" to
replace the current "Channel" settings.
Note: After you use the "Recall" function, the history of previous actions is deleted, i.e.
any actions performed previously cannot be undone or redone using the [UNDO/
REDO] keys.
Remote command:
MMEMory:LOAD:STATe on page 1070
11.3.2.4 Startup Recall Settings
Access: "Open" icon in the toolbar > "Startup Recall"
Storing and Recalling Instrument Settings and Measurement Data