R&S FSV3000 Series - Page 708

Network and Remote Operation
R&S
®
FSVA3000/ R&S
®
FSV3000
708User Manual 1178.8520.02 ─ 01
The most recent error message during remote operation can be displayed on the
screen, see "Display Remote Errors" on page 701.
If the number of error messages exceeds the capacity of the error buffer, the oldest
error message is removed before the newest one is inserted. To clear the message
buffer use the "Clear Error List" button. It is automatically cleared when the R&S FSV/A
is shut down.
The following information is available:
No Device-specific error code
Error Brief description of the error
Date/Time Time the message occurred
Remote command:
SYSTem:ERRor:LIST? on page 1132
Clear Error List
Deletes the error message buffer for remote operation.
Note: The remote error list is automatically cleared when the R&S FSV/A is shut down.
Network and Remote Control Settings