R&S FSV3000 Series - Page 978

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
978User Manual 1178.8520.02 ─ 01
Example:
FORM:DEXP:FORM CSV
Manual operation: See " File Type " on page 523
FORMat:DEXPort:TRACes <Selection>
This command selects the data to be included in a data export file (see MMEMory:
STORe<n>:TRACe on page 979).
Parameters:
<Selection> SINGle | ALL
SINGle
Only a single trace is selected for export, namely the one speci-
fied by the MMEMory:STORe<n>:TRACe command.
ALL
Selects all active traces and result tables (e.g. Result Summary,
marker peak list etc.) in the current application for export to an
ASCII file.
The <trace> parameter for the MMEMory:STORe<n>:TRACe
command is ignored.
*RST: SINGle
Manual operation: See " Export all Traces and all Table Results " on page 521
FORMat:DIMPort:TRACes <Selection>
This command selects the data to be included in a data import file (see MMEMory:
LOAD<n>:TRACe on page 979).
For details on importing data see Chapter 9.6.3, "How to Import Traces", on page 523.
Parameters:
<Selection> SINGle | ALL
SINGle
Only a single trace is selected for import, namely the one speci-
fied by the MMEMory:LOAD<n>:TRACe on page 979 com-
mand.
ALL
Imports several traces at once, overwriting the existing trace
data for any active trace in the result display with the same trace
number. Data from the import file for currently not active traces
is not imported.
The <trace> parameter for the MMEMory:LOAD<n>:TRACe
on page 979 command is ignored.
*RST:
SINGle
Manual operation: See " Import All Traces / Import to Trace " on page 523
See " Import ASCII File to Trace " on page 523
Analyzing Measurements (Basics)