Ricoh D147 - Page 1038

Main SP Tables-2-2
System Maintenance Section 2-319 D146/D147/D148/D149/D150
SP Mode Tables
2635
[Sp1Thick:LeadingEdgeCorrection]
Sets output value [%] for paper transfer ampere leading edge correction per
printing sides of special paper 1 using thick paper setting. “Thick paper” means
thick paper 2 or upper with model D148/D149/D150, thick paper 1 or upper with
model D146/D147.
003 Paper Transfer:1side *ENG [0 to 995 / 100 / 5%/step]
004 Paper Transfer:2side *ENG [0 to 995 / 100 / 5%/step]
2636
[Sp1Thick:SwitchTimingLeadEdge]
Sets switch timing for paper transfer ampere leading edge correction per
printing sides of special paper 1 using thick paper setting. “Thick paper” means
thick paper 2 or upper with model D148/D149/D150, thick paper 1 or upper with
model D146/D147.
003 Paper Transfer:1side *ENG [0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG [0 to 50 / 0 / 2mm/step]
2637
[Sp1Thick:TrailEdgeCorrection]
Sets output value [%] for paper transfer ampere trailing edge correction per
printing sides of special paper 1 using thick paper setting. “Thick paper” means
thick paper 2 or upper with model D148/D149/D150, thick paper 1 or upper with
model D146/D147.
003 Paper Transfer:1side *ENG [0 to 995 / 100 / 5%/step]
004 Paper Transfer:2side *ENG [0 to 995 / 100 / 5%/step]
2638
[Sp1Thick:SwitchTimingTrailEdge]
Sets switch timing for paper transfer ampere trailing edge correction per printing
sides of special paper 1 using thick paper setting. “Thick paper” means thick
paper 2 or upper with model D148/D149/D150, thick paper 1 or upper with
model D146/D147.
003 Paper Transfer:1side *ENG [0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG [0 to 50 / 0 / 2mm/step]