EasyManua.ls Logo

Ricoh D147 - Installation Procedure; Ieee 802.11 A;G;N Interface Unit Type M2; Accessory Check

Ricoh D147
2375 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IEEE 802.11a/g/n Interface Unit Type M2
D146/D147/D148/D149/D150 2-144 SM
2.25 IEEE 802.11A/G/N INTERFACE UNIT TYPE M2
2.25.1 ACCESSORY CHECK
No. Description Q’ty
1 IEEE802.11a/g/n Unit 1
2 Velcro Fasteners 2
3 Clamps 8
§ Since disassembly/alteration of a wireless LAN board is illegal, during service
replacements, replace the whole PCB assembly.
§ Be sure to give the leaflet provided to the customer.
2.25.2 INSTALLATION PROCEDURE
§ When you install this option, Switch the MFP’s power supply OFF, and unplug the power
plug from the mains outlet.
§ Do not put your hand into the controller box. It will result in a malfunction or injury.
§ Before doing any work, touch a metal object to discharge static electricity from the body.
There is a possibility that the extension wireless LAN board may malfunction due to static
electricity.

Table of Contents

Related product manuals