SD Card Appli Move
D146/D147/D148/D149/D150 2-174 SM
2.33.3 UNDO EXEC
This is a recovery function if an application is incorrectly transferred to a different device of the
same model.
1. Turn the power off.
2. SD card slot cover [A] (
×1).
3. Set the integrated SD card in Slot 1.
4. Set the SD card which became empty after integration in Slot 2.
5. Turn the power on, and press [ENTER] in SP5-873-002 (SD Card Appli Move: Undo Exec).
6. When a confirmation screen is displayed, press [ENTER].
§ If [CANCEL] is pressed, the display returns to the previous screen.
§ Note that if the power supply is turned off, a panel operation is performed, or the
cover is opened during cancellation, it will result in a malfunction.
7. When cancellation is complete, press [CLOSE].
8. Press [END] twice.
9. Turn the power off.
10. Attach the SD card slot cover (
×1).
11. Turn the power on, and check that the application has been deleted.
To Next Page
Loading...
