SD Card Appli Move
SM 2-173 D146/D147/D148/D149/D150
4. Turn the power on, and press [ENTER] in SP5-873-001 (SD Card Appli Move: Move Exec).
5. When a confirmation screen is displayed, press [ENTER] (it takes about 2 - 3 minutes).
§ If [CANCEL] is pressed, the display returns to the previous screen.
§ Note that if the power supply is turned off, a panel operation is performed, or the
cover is opened during merge, it will result in a malfunction.
6. When merge is complete, and the following screen is displayed, press [CLOSE].
§ If the process is terminated abnormally, perform the merge in SP mode again.
§ If the capacity of the destination SD card is insufficient, the merge operation cannot
be performed.
1. Press [END] twice.
2. Turn the power off.
3. Remove the empty SD card after transfer from Slot 2.
4. Attach the slot cover(
×1).
5. Turn the power on, output the system setting list, and check that the options are
recognized correctly.
To Next Page
Loading...
