D163 36 SM
3. Insert the SD card (Fax Connection Unit Type M3 for D146/D147 or M4 for
D148/D149/D150) in SD slot 2 (lower) with its label face [B] towards the front of the
machine. Then push it slowly into SD slot 2 (lower) until you hear a click.
4. Plug in, and then turn on the machine.
5. Move the Fax Connection Unit Type M3 (for D146/D147) or (M4 for D148/D149/D150)
application from the SD card in SD slot 2 (lower) to the SD card in SD slot 1 (upper)
with SP5-873-001.
6. Turn off the machine.
7. Remove the SD card from SD slot 2 (lower), and then keep it in a safe place (see “SD
Card Appli Move” in the manual for the main frame).
8. Attach the SD-card slot cover, and then turn on the machine (
x 1)
9. Make sure that the machine can recognize the option (See ‘Self-Diagnosis Report’ and
check whether the aics (D1655759 for Type M3/ D1665759 for Type M4) is listed in
[Loading Program].)
Registering the Remote Machine
Only one machine can be registered as the Remote Machine.
On the Client-side Machine(s):
1. Press the [User Tools/Counter] key on the operation panel
2. Press [System Settings] to select.
3. Press [Administrator Tools] to select.
4. Press [Program/Change/Delete Remote Machine] to select.
5. Enter the IP address or host name of the Remote Machine.
6. Press [Set] to set after “connection test”.
7. Press [Exit] to exit from the set-up procedure.
To Next Page
Loading...
