Scanner Unit
D146/D147/D148/D149/D150 4-48 SM
Procedure for the scanner
1. Remove the exposure glass, and peel off the sheet [A]
2. Wipe the exposure glass with alcohol, etc., so that no glue remains from the double-sided
tape.
§ Remember that if any glue remains, it will cause a paper jam in the ADF.
4.6.12 MODIFYING THE SCANNER (CONTACT/CONTACTLESS)
WHEN USING SPDF
When changing from contactless to contact original feed, some parts of the ADF and scanner
must be replaced.
Procedure for the SPDF
1. Open the SPDF
2. Lower entrance guide unit [A] ( ×2)
§ The part below the contactless lower entrance guide unit is black [A].
§ The part below the contact lower entrance guide unit is colorless and transparent [B].
To Next Page
Loading...
