Ricoh D147 - Page 1045

Main SP Tables-2-2
D146/D147/D148/D149/D150 2-326 System Maintenance Section
032
Wide
Roller:PaperTransfer:2Side:S3
*ENG [1 to 100 / 82 / 1/step]
035
Wide
Roller:PaperTransfer:1Side:S4
*ENG [1 to 100 / 79 / 1/step]
036
Wide
Roller:PaperTransfer:2Side:S4
*ENG [1 to 100 / 83 / 1/step]
039
Wide
Roller:PaperTransfer:1Side:S5
*ENG [1 to 100 / 79 / 1/step]
040
Wide
Roller:PaperTransfer:2Side:S5
*ENG [1 to 100 / 84 / 1/step]
2655
[Sp2Thick:LeadingEdgeCorrection]
Sets output value [%] for paper transfer ampere leading edge correction per
printing sides of special paper 2 using thick paper setting. “Thick paper” means
thick paper 2 or upper with model D148/D149/D150, thick paper 1 or upper with
model D146/D147.
003 Paper Transfer:1side *ENG [0 to 995 / 100 / 5%/step]
004 Paper Transfer:2side *ENG [0 to 995 / 100 / 5%/step]
2656
[Sp2Thick:SwitchTimingLeadEdge]
Sets switch timing for paper transfer ampere leading edge correction per
printing sides of special paper 2 using thick paper setting. “Thick paper” means
thick paper 2 or upper with model D148/D149/D150, thick paper 1 or upper with
model D146/D147.
003 Paper Transfer:1side *ENG [0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG [0 to 50 / 0 / 2mm/step]