Ricoh D147 - Page 1420

Main SP Tables-7
System Maintenance Section 2-701 D146/D147/D148/D149/D150
SP Mode Tables
7852 [DF Glass Dust Check]
001
Dust Detection Counter *ENG [0 to 65535 / 0 / 1/step]
Records the times detecting dust at all points of front side scan position. When
there is a dust even when before starting the next job, consider as same dust
and doesn't count. Counts when SP4-020-001: DF scan glass part dust detect
front is ON.
002
Dust Counter Clear
Counter
*ENG [0 to 65535 / 0 / 1/step]
For checking front side scan position move effect. Counts the times that strips
were avoided by detecting dust and move the sheet thrugh DF scan position.
Counts when SP4-020-001: DF scan glass part dust detect front is ON.
003
Dust Detection Counter:
Back
*ENG [0 to 65535 / 0 / 1/step]
For Single Path simultaneous duplex models only. Records the times detecting
dust at all points of rear side scan position. When there is a same dust even
when before starting the next job, consider as same dust and doesn't count. *
Counts when SP4-020-011: DF
7853
[Replace Counter]
-
002 # PCU:K ENG
[0 to 255 / 0 / 1/step]
003 # Dev Unit:K ENG
004 Developer:K ENG
025 # PCU:C ENG
[0 to 255 / 0 / 1/step]
026 # Dev Unit:C ENG
027 Developer:C ENG
048 # PCU:M ENG
[0 to 255 / 0 / 1/step]
049 # Dev Unit:M ENG
050 Developer:M ENG