Main SP Tables-8
System Maintenance Section 2-755 D146/D147/D148/D149/D150
8221
[ADF Org Feeds]
These SPs count the number of pages fed through the ADF for front and back
side scanning.
001
Front *CTL [0 to 9999999 / 0 / 1 / step]
Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Front side count is
the same as the number of pages fed for either simplex or duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Front side count
is the same as the number of pages fed for duplex front side scanning. (The
front side is determined by which side the user loads face up.)
002
Back *CTL [0 to 9999999 / 0 / 1 / step]
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back count is the
same as the number of pages fed for duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Back count is
the same as the number of pages fed for duplex rear-side scanning.
§ When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
§ If a jam occurs during the job, recovery processing is not counted to avoid double counting.
Also, the pages are not counted if the jam occurs before the first sheet is output.
8231
[Scan PGS/Mode]
These SPs count the number of pages scanned by each ADF mode to
determine the work load on the ADF.
001
Large Volume *CTL [0 to 9999999 / 0 / 1 / step]
Selectable. Large copy jobs that cannot be loaded in the ADF at one time.
002
SADF *CTL [0 to 9999999 / 0 / 1 / step]
Selectable. Feeding pages one by one through the ADF.
003
Mixed Size *CTL [0 to 9999999 / 0 / 1 / step]
Selectable. Select "Mixed Sizes" on the operation panel.
004 Custom Size *CTL [0 to 9999999 / 0 / 1 / step]
To Next Page
Loading...
