Main SP Tables-8
System Maintenance Section 2-761 D146/D147/D148/D149/D150
§ When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is
counted as 2.
§ When several documents are merged for a print job, the number of pages stored are counted
for the application that stored them.
§ These counters are used primarily to calculate charges on use of the machine, so the
following pages are not counted as printed pages:
- Blank pages in a duplex printing job.
- Blank pages inserted as document covers, chapter title sheets, and slip sheets.
- Reports printed to confirm counts.
- All reports done in the service mode (service summaries, engine maintenance reports, etc.)
- Test prints for machine image adjustment.
- Error notification reports.
- Partially printed pages as the result of a copier jam.
8391
LSize PrtPGS *CTL [0 to 99999999 / 0 / 1 / step]
These SPs count pages printed on paper sizes A3/DLT and larger.
Note: In addition to being displayed in the SMC Report, these counters are
also displayed in the User Tools display on the copy machine.
8401 [T:PrtPGS/LS] *CTL These SPs count the number of pages
printed from the document server. The
counter for the application used to print
the pages is incremented.
The L: counter counts the number of
jobs stored from within the document
server mode screen at the operation
panel.
[0 to 9999999 / 0 / 1 / step]
8402 [C:PrtPGS/LS] *CTL
8403 [F:PrtPGS/LS] *CTL
8404 [P:PrtPGS/LS] *CTL
8405 [S:PrtPGS/LS] *CTL
8406 [L:PrtPGS/LS] *CTL
§ Print jobs done with Web Image Monitor and Desk Top Binder are added to the L: count.
§ Fax jobs done with Web Image Monitor and Desk Top Binder are added to the F: count.
To Next Page
Loading...
