Main SP Tables-8
System Maintenance Section 2-767 D146/D147/D148/D149/D150
003 Tray 2 *CTL [0 to 99999999 / 0 / 1 / step]
004 Tray 3 *CTL
Paper Tray Unit (Option)
[0 to 99999999 / 0 / 1 / step]
005 Tray 4 *CTL
006 Tray 5 *CTL
LCT (Option)
[0 to 99999999 / 0 / 1 / step]
007 Tray 6 *CTL Currently not used.
008 Tray 7 *CTL Currently not used.
009 Tray 8 *CTL Currently not used.
010 Tray 9 *CTL Currently not used.
011 Tray 10 *CTL Currently not used.
012 Tray 11 *CTL Currently not used.
013 Tray 12 *CTL Currently not used.
014 Tray 13 *CTL Currently not used.
015 Tray 14 *CTL Currently not used.
016 Tray 15 *CTL Currently not used.
8461
[T:PrtPGS/Ppr Type]
These SPs count by paper type the number pages printed by all applications.
§ These counters are not the same as the PM counter. The PM counter is
based on feed timing to accurately measure the service life of the feed
rollers. However, these counts are based on output timing.
§ Blank sheets (covers, chapter covers, slip sheets) are also counted.
§ During duplex printing, pages printed on both sides count as 1, and a
page printed on one side counts as 1.
8462
[C:PrtPGS/Ppr Type]
These SPs count by paper type the number pages printed by the copy
application.
8463 [F:PrtPGS/Ppr Type]
To Next Page
Loading...
