Printer SP Mode
System Maintenance Section 2-799 D146/D147/D148/D149/D150
A collate type (shift or normal) will be applied to all jobs that do not
explicitely define a collate type.
Note: If #5-0 is enabled, this BitSwitch has no effect.
bit 3 [PCL5e/c,PS]: PDL Auto Switching Enabled Disabled
Enables/Disables the MFPs ability to change the PDL processor mid-job.
Some host systems submit jobs that contain both PS and PCL5e/c. If Auto
PDL switching is disabled, these jobs will not be printed properly.
bit 4 DFU - -
bit 5 DFU - -
bit 6 Switch dither Use
normal
dither
Use
alternative
dither
*Please refer to RTB#RD014018
bit 7 DFU - -
1001 [Bit Switch]
003 Bit Switch 3 0 1
bit 0 DFU - -
bit 1 DFU - -
bit 2 [PCL5e/c]: Legacy HP compatibility Disabled Enabled
Uses the same left margin as older HP models such as HP4000/HP8000.
In other words, the left margin defined in the job (usually "<ESC>*r0A")
will be changed to "<ESC>*r1A".
bit 3 DFU - -
bit 4 DFU - -
bit 5 DFU - -
bit 6 DFU - -
bit 7 DFU - -
To Next Page
Loading...
