Printer SP Mode
System Maintenance Section 2-809 D146/D147/D148/D149/D150
1101
[Data Recall]
Recalls a set of gamma settings. This can be either a) the factory setting, b)
the previous setting, or c) the current setting.
001 Factory *CTL
[ - / - / - ]
[Execute]
002 Previous *CTL
003 Current *CTL
1102
[Resolution Setting]
Selects the printing mode (resolution) for the printer gamma adjustment.
001 Resolution Setting CTL
[0 to 9 / 0 / 1/step]
0: 1200x1200 Photo (2bit/4col)
1: 1200x1200 Photo (1bit/4col)
2: 600x600 Photo (4bit/4col)
3: 600x600 Photo (2bit/4col)
4: 600x600 Photo (1bit/4col)
5: 1200x1200 Text (2bit/4col)
6: 1200x1200 Text (1bit/4col)
7: 600x600 Text (4bit/4col)
8: 600x600 Text (2bit/4col)
9: 600x600 Text (1bit/4col)
1103
[Test Page]
Prints the test page to check the color balance before and after the gamma
adjustment.
001 Color Gray Scale CTL
[ - / - / - ]
[Execute]
002 Color Pattern CTL
To Next Page
Loading...
