Ricoh D147 - Page 1534

Scanner SP Mode
System Maintenance Section 2-815 D146/D147/D148/D149/D150
SP Mode Tables
1011 [Org Count Display]
001
- *CTL
[0 or 1 / 0 / 1 / step]
0: OFF (no display)
1: ON (count displays)
This SP codes switches the original count display on/off.
1012 [User Info Release]
001
- *CTL
[0 or 1 / 1 / 1 / step]
1: Release
0: Do not release
This SP code sets the machine to release or not release the following items at
job end.
§ Destination (E-mail/Folder/CS)
§ Sender name
§ Mail Text
§ Subject line
§ File name
1013 [Multi Media Function]
002
- *CTL
[0 or 1 / 1 / 1 / step]
0: Disable
1: Enable
This SP code enables/disables the multi-media function option (USB 2.0/SD
Slot) mounted on the front of the machine. Operators can scan documents to
either an SD card or a USB memory device inserted into this unit. This SP
must be enabled (set to "1") in order for the device to function.
1014 [-]
001
- *CTL
[0 or 1 / 0 / 1 / step]
0: Disable
1: Enable
Enables / Disables to input password for Scan To Folder.