Ricoh D147 - Page 1561

Input Check Table
D146/D147/D148/D149/D150 3-22 System Maintenance Section
019
Booklet Standard Fence HP
Sensor
ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
020
Booklet Stapler HP Sensor ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
022
Folder Blade Cam HP Sensor ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
023
Folder Blade HP Sensor ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
024
Shift Roller HP Sensor ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
025
Shift Jogger HP Sensor: Front ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
* Not use: currently, VOLGA-B does not have setting jogger in system
configuration.
026
Shift Jogger HP Sensor: Rear ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
* Not use: currently, VOLGA-B does not have setting jogger in system
configuration.
027
Shift Jogger Retraction HP
Sensor
ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
* Not use: currently, VOLGA-B does not have setting jogger in system
configuration.
028
Drag Roller Vibrating HP
Sensor
ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.
029
LE Guide HP Sensor ENG [0 or 1 / 0 / 1/step]
Gets information of specified sensor. Displays signal level of sensor as it is.