Procedure
D146/D147/D148/D149/D150 5-8 System Maintenance Section
§ When the power supply is switched OFF during firmware update, update is interrupted,
and the power is switched ON again, normal operation cannot be guaranteed.
§ To guarantee operation, an update error continues to be displayed until update is
successful.
§ In this case, insert the SD card again, switch the power ON, and continue download of
firmware from the SD card automatically.
§ Web access card software: EXJS (EXtended Java Script) is a Type-C ESA application,
and like a conventional Web access card, update using an sdk folder is required.
§ The PS3 firmware program is included in the preinstalled PDF firmware.
§ In the default state, although the PS3 firmware program is hidden in the disabled state,
the function is enabled by installing the PS3 card.
§ (The program installed in the PS3 card is a dongle (key) for enabling PS3 function).
§ Due to the above specification, the self-diagnosis result report shows the ROM module
number / software version of the PDF firmware at the PS location.
To Next Page
Loading...
