SM 195 D163
6800F6(H) - User parameter switch 38 (SWUSR_26)
Maximum number of transmissions the machine attempts before determining that a fax cannot be
forwarded from a sender (including special senders) to a folder destination
6800F7(H) - User parameter switch 39 (SWUSR_27)
Interval (in minutes) between resend attempts after failing to forward a fax from a sender
(including special senders) to a folder destination
6800F8(H) - User parameter switch 40 (SWUSR_28)
Bit 0: When memory space is insufficient, the machine prints and then deletes the oldest faxes,
creating memory space for storage of new faxes. 0: Disabled, 1: Enabled
Bit 1 to 7: Not used
6800FF(H) - User parameter switch 45 (SWUSR_2D)
Bit 0 and 1:
Bit 2: File format for files transmitted to e-mail addresses and folders registered as forwarding,
destinations of backup file transmission, receivers for Personal Box, or end receivers for Transfer
Box. 0: PDF 1: PDF/A
Bit 3:
Bit 4 to 7: Not used
680100 to 68010F(H) - G4 Parameter Switches – Not used
680110 to 68012F(H) - G4 Internal Switches – Not used
680130 to 68016F(H) - Service Switches
680170 to 68017F(H) - IFAX Switches
680180 to 68018F(H) - IP-FAX
Switches
680190
to 6801A3(H) - PSTN-1 RTI (Max. 20 characters - ASCII) - See the following note.
6801A4 to 6801B7(H) - PSTN-2 RTI (Max. 20 characters - ASCII)
6801B8 to 6801CB(H) - PSTN-3 RTI (Max. 20 characters - ASCII)
6801CF to 68020E(H) - TTI 1 (Max. 64 characters - ASCII) - See the following note.
68020F to 68024E(H) - TTI 2
68024F to 68028E(H) - TTI 3
68028F to 6802CE(H) - TTI 4
6802CF to 68030E(H) - TTI 5
68030F to 68034E(H) - TTI 6
68034F to 68038E(H) - TTI 7
68038F to 6803CE(H) - TTI 8
6803CF to 68040E(H) - TTI 9
68040F to 68044E(H) - TTI 10
If the number of characters is less than the maximum (20 for RTI, 32 for TTI), add a stop
code (00[H]) after the last character.
68044F(H)
To Next Page
Loading...
