Ricoh D147 - Page 2001

SM 225 D163
6.4 IP-FAX SPECIFICATIONS
Network:
Local Area Network
Ethernet/10base-T, 100base-TX
Gigabit Ethernet/1000 Base-T
IEEE802.11a/g, g (wireless LAN)
Scan line density:
8 x 3.85 lines/mm, 200x100dpi (standard character),
8 x 7.7lines/mm, 200x200dpi (detail character),
8 x 15.4lines/mm (fine character: optional expansion memory
required),
16 x 15.4lines/mm, 400x400dpi (super fine character: optional
expansion memory required)
Maximum Original
size:
A3 or 11" x 17" (DLT)
Custom: 297mm x 1200mm (11.7” x 47.3”)
Maximum scanning
size:
297mm x 1200mm (11.7” x 47.3”)
Transmission
protocol:
Recommended: T.38 Annex protocol, TCP, UDP/IP
communication, SIP (RFC 3261 compliant), H.323 v2
Compatible
machines:
IP-Fax compatible machines
IP-Fax transmission
function:
Specify IP address and send faxes to an IP-Fax compatible fax
through a network.
Also capable of sending faxes from a G3 fax connected to a
telephone line via a VoIP gateway.
IP-Fax reception
function:
Receive faxes sent from an IP-Fax compatible fax through a
network.
Also capable of receiving faxes from a G3 fax connected to a
telephone line via a VoIP gateway.