Punch Unit PU3040
D146/D147/D148/D149/D150 2-134 SM
12. Attach the components [A] and [B] to the finisher ( ×2).
13. Attach the left rear cover
14. Insert the upper left cover [A] from the front, and slide it to attach it.
15. Attach stabilizers [A].
§ Because the weight is biased to the right of the machine if the inner finisher is
installed, anti-tip components are required on the left side. Because they are
included with the finisher, install these components at the same time as you install
the inner finisher.
To Next Page
Loading...
