Ricoh D147 - Page 2171

Adjustment of the Flat Fold Booklet Unit
D688/D689 38 SM
1.7.2 ADJUSTING THE FOLDING SPEED
You can adjust the thickness of the booklet by adjusting the moving speed of the flat fold booklet
unit.
If you want to make the booklet thinner, set a slower speed. If you want to make the booklet
thicker, set a faster speed.
1. Enter the SP mode.
2. Set the moving speed of the flat fold booklet unit for each paper size with SP6-114-001
to 010 (Fold Speed Adj.: 2K/3K FIN).
SP Setting Items Selection
Default
Value
SP6-114-001
Fold Speed Adj.: 2K/3K FIN: A3
SEF
0: Standard
*
1: Middle
2: Low
0: Standard
SP6-114-002
Fold Speed Adj.: 2K/3K FIN: B4
SEF
SP6-114-003
Fold Speed Adj.: 2K/3K FIN: A4
SEF
SP6-114-004
Fold Speed Adj.: 2K/3K FIN: B5
SEF
SP6-114-005
Fold Speed Adj.: 2K/3K FIN: DLT
SEF
SP6-114-006
Fold Speed Adj.: 2K/3K FIN: LG
SEF
SP6-114-007 Fold Speed Adj.: 2K/3K FIN: LT SEF
SP6-114-008
Fold Speed Adj.: 2K/3K FIN:
12"×18"
SP6-114-009
Fold Speed Adj.: 2K/3K FIN: 8K
SEF
SP6-114-010 Fold Speed Adj.: 2K/3K FIN: Other
* [0: Standard] is faster than [1: Middle].
3. Exit the SP mode.