Data Overwrite Security Unit Type H (D377)/ I (D362)
D146/D147/D148/D149/D150 2-158 SM
11. Take a test copy, and then make sure that the Data Overwrite icon changes from “Dirty” (solid)
to “Dirty” (blinking), and then to “Clear”.
NOTE:
• If the Data Overwrite icon does not change to Clear, check to see if there are any active
Sample Print or Locked Print jobs. A Sample Print or Locked Print job can only be
overwritten after it has been executed.
• The Dirty icon blinks while an overwrite is in progress.
• If you use your machine for a while with Auto Erase Memory disabled, and then
suddenly enable it, the overwrite process may take 10 or more hours depending on
HDD usage.
Data Overwrite icon:
§ Clear (There is no temporary data to be overwritten)
§ Dirty (There is temporary data to be overwritten)
To Next Page
Loading...
