Tray Heater for PFU PB3160 / LCIT PB3170
D146/D147/D148/D149/D150 2-204 SM
3. Reattach trays.
4. Remove the Consolidated 2 brackets [A] (
×2)
5. Remove the Rear cover [A] (
×2)
6. Connect the harness to the two points shown in the photo. ( × 1)
7. Reattach all parts removed.
8. Turn the machine main power switch ON.
9. Turn the heater switch [A] ON.
Rev. 04
07
2014
To Next Page
Loading...
