Service Call 501-584
SM 5-43 D146/D147/D148/D149/D150
SC No. Level Error Name/Error Condition/Major Cause/Solution
§ Reset the paper
§ Remove the foreign matter
2nd tray limit sensor, 2nd tray lift motor
§ Check the harness
§ Reset the connector
§ Replacement
2nd paper feed unit, 2nd tray
§ Replacement
Paper transport IOB
§ Replacement
SC502-02 B 2nd Tray Lowering Error
The detection count of 2nd tray descent motor descent errors
reaches a total of 5.
(up to 4, reset is displayed)
§ The 2nd paper feed tray limit sensor connector missing,
malfunction, and dirt
§ 2nd tray lift motor connector missing, disconnection,
malfunction
§ Foreign matter, such as paper scrap, is caught between the
paper feed tray and the tray lift motor
§ Paper set fault
§ Paper overload
§ Reset the paper
§ Remove the foreign matter
2nd tray limit sensor, 2nd tray lift motor
§ Check the harness
§ Reset the connector
§ Replacement
2nd paper feed unit, 2nd tray
§ Replacement
Paper transport IOB
§ Replacement
To Next Page
Loading...
