Main SP Tables-1
D146/D147/D148/D149/D150 2-6 System Maintenance Section
1007
[By-Pass Size Detection]
-
001
Switch LT SEF/LG SEF ENG
[0 or 1 / 0 / 1/step]
0:OFF
1:ON
Select either LT SEF or LG SEF to detect preferentially when using bypass tray
which can not auto detect size.
002
By-Pass Jam Detection Set ENG
[0 or 1 / 0 / 1/step]
0: Normal Detection
1: Simple Detection
Special order function for old models: When receiving long length FAX, enter
max. size of custom size for when setting receiving in bypass size, prevent from
jamming shorter data than that. 0: Normal detect : when paper size is different
form set size (longer of shorter), jam. 1: Simple detect: Jam when paper size
is longer than set size.
1008
[SI By-Pass Size Detection Adj]
-
001
Sidefence Auto Adj *ENG
[0 or 1 / 1 /
1/step]
0: OFF
1: ON
With one action bypass models, switches do or do not side fence auto fine tune
when paper is set. But when setting auto fine tune off, detectable paper size will
drop to same as regular bypass tray.
003
Paper Set Fix Time
*ENG
[0 to 10 / 2 /
1sec/step]
Set the waiting time to activate the side fence auto adjustment after a stack of
paper has been set on the by-pass tray. Will have more time till side fence to star
moving when setting waiting time longer, but time for setting paper will also be
loner. If waiting time is short, side fence might star to move during setting paper.
SC or malfunction or so will not occur.
To Next Page
Loading...
