Ricoh D147 - Page 852

Main SP Tables-1
System Maintenance Section 2-133 D146/D147/D148/D149/D150
SP Mode Tables
Prevents coat strips, waving, image sore. Reflect adjusted value as they are
Metis-C1a: 146mm/s, Metis-C1b: 146mm/s, Metis-C1c: 186mm/s, Metis-C1d:
256mm/s, Metis-C1e: 256mm/s
059
Duplex Enter
CW:Mid-thick:Std
*ENG [-4.0 to 4.0 / 0.5 / 0.1%/step]
Prevents coat strips, waving, image sore. Reflect adjusted value as they are
Metis-C1a: 146mm/s, Metis-C1b: 146mm/s, Metis-C1c: 186mm/s, Metis-C1d:
256mm/s, Metis-C1e: 256mm/s
060
Duplex Enter CW:Thick1:Low *ENG [-4.0 to 4.0 / 0.8 / 0.1%/step]
Prevents coat strips, waving, image sore. Reflect adjusted value as they are
Metis-C1a: 73mm/s, Metis-C1b: 73mm/s
061
Duplex Enter CW:Thick1:Mid *ENG [-4.0 to 4.0 / 0.8 / 0.1%/step]
Prevents coat strips, waving, image sore. Reflect adjusted value as they are
Metis-C1c: 108mm/s, Metis-C1d: 108mm/s, Metis-C1e: 108mm/s
062
Duplex Enter CW:Thick2:Low *ENG [-4.0 to 4.0 / 0.8 / 0.1%/step]
Prevents coat strips, waving, image sore. Reflect adjusted value as they are
Metis-C1 all: 73mm/s
063
Duplex Enter CW:Thick3:Low *ENG [-4.0 to 4.0 / 0.7 / 0.1%/step]
Prevents coat strips, waving, image sore. Reflect adjusted value as they are
Metis-C1 all: 73mm/s
064
Duplex CW:Plain:Low *ENG [-4.0 to 4.0 / 0.7 / 0.1%/step]
Prevent shock jitter by adjusting sub scan scale, scale error rate declination,
image position accuracy improve. Reflects adjusted value as they are. All:
73mm/s, 1200dpi mode
065
Duplex CW:Plain:Std *ENG [-4.0 to 4.0 / 0.7 / 0.1%/step]
Prevent shock jitter by adjusting sub scan scale, scale error rate declination,
image position accuracy improve. Reflect adjusted value as they are
Metis-C1a: 146mm/s, Metis-C1b: 146mm/s, Metis-C1c: 186mm/s, Metis-C1d:
256mm/s, Metis-C1e: 256mm/s